" Experimental investigation of bearing capacity of sand reinforced with rubbers (crumbs tire)"

The topic of my thesis is ” Experimental investigation of bearing capacity of sand reinforced with rubbers (crumbs tire)”. So, this research is mainly talked about the properties of sand that will be mixed with tire crumbs and how does the crumbs will enhance the properties of the sand. Actually, this sand-rubber mixture will be applied on Boubyan island in Kuwait which is known with its very soft and muddy clay. Five samples will be used in this research which are:
1- Sand with 0% rubber crumbs (sand only)
2- Sand with 10 % rubber crumbs
3- Sand with 20 % rubber crumbs
4- Sand with 30 % rubber crumbs
5- Sand with 40 % rubber crumbs

After I’ve done the Standard Proctor Compaction test and the Direct Shear Test for the sand and sand-rubber mixture and obtained the properties for each sample, Plaxis 2D software will be used to calculate the settlement and ultimate bearing capacity for all samples and it will helps to know for each sample of sand rubber mixture how much thickness will be needed to make the surface (boubyan clay) stable and not collapse.

Know, to write this thesis I need the writer to write the methodology, results, analysis and discussion, and conclusion. The introduction and background will be written after. If I see what I want in the sections I mentioned I will pay later on for the introduction and literature review.

I attached the file for the main ideas that should be mentions in the thesis the file (thesis) will explain how I wants my thesis flow and what are the main headlines that should be discussed. All the results I got from the experiments tests I done is there in the file. Also, there are some graphs and tables that can help to analyze the results. The paragraphs written in this file should be changed and written in your way because they are all copied from another papers. Its just there to explain for you what I want exactly.

For the compaction test part, the file (past paper) will help you to know how I want you to analyze the results I got from the test. I would like you to add more paragraphs from your own.
For the direct shear test part, the files (past paper) and (Gerard thesis) is helpful. Try to go the same way how Gerard wrote his thesis because I really like his way.
Finally, for the plaxis part the file (plaxis thesis) is the file I want you to follow to write the discussion for the plaxis 2D part. In this file the thesis was about only sand while my thesis is about 5 samples sand and sand-rubber mixture with different ratios of rubber crumbs so do it the same but for my idea the rubber percentage added is a variable. the results for all sample were represented in the excel file attached. While the faiure pattern is selected according to the figure attached in the (failure pattern) folder. The failure pattern is selected according to the plastic point (the red points in the appeared in the figures if they reached the lower layer or no). I will attach a file name (plaxis manual) that will help you to write about how does plaxis work and in page 164 or (5-10) you will find the part of plastic points. Also, as I mentioned above the file (past thesis) will help you to write more for this part.

So now, the thesis will be as follow: (use (thesis) file it attached in the website it’s a word doc)
1- Methodology (not less than 14 pages)

a- Introduction: write that this section will talk about the materials used and the ratios of rubber that will be mixed with the sand and that the percentages of rubber will be added according to the total weight of the samples.
b- Research materials
1- Sand: write about the locations of the sand and from where they’ve been collected. And the properties of the sand measured from the sieve analysis, specific gravity, and max./min. unit weight.
2- Rubber: from where it been taken and its size. Sieve analysis and specific gravity and absorption. And I need the writer to write more about the properties of rubber in general and how it helps to enhance the properties of the sand.
c- Main test equipment
1) Standard Proctor Compaction test: write about this test in details and how samples is prepared ( It is written in (thesis) file), how does it work and what can be measured form this test (ex. Optimum water content and maximum dry unit weight). Write that for this test 5 kg will be used for each sample
-Sample 1: sand only
-sample 2: Sand with 10% rubber crumbs
-sample 3: Sand with 20% rubber crumbs
-sample 4: Sand with 30% rubber crumbs
-sample 5: Sand with 40% rubber crumbs
2) Direct shear test (DST): write about this test in details and how samples is prepared ( It is written in (thesis) file, how does it work and what can be measured form this test (ex. Friction angle, cohesion, vertical and horizontal displacement, …. etc.). Write that for this test 3 kg will be used for each sample as mentioned above and that the water content will be added in this test depend on the one obtained in the compaction test for each sample separately.
3) Plaxis 2D: here write that in this software a model will be run to calculate the settlement and ultimate bearing capacity for each sample. The load will be used in the run in 1000 kN and different heights will be tested until collapse disappear and stable results reached.

2- Results, analysis, and discussion (not less than 34 pages including the pictures/graphs)
1- Compaction test results
2- Direct Shear Test results
a- Shear stress horizontal displacement relationship
b- Vertical deformation horizontal displacement relationship
c- Coulomb failure envelope for tire crumbs sand mixtures
d- Influence of tire crumbs content on cohesion and friction angle of sand
e- Influence of tire crumbs and applied normal pressure on shear strength of sand
3- Plaxis 2D results
the results for all sample were represented in the excel file attached. While the faiure pattern is selected according to the figure attached in the (failure pattern) folder. The failure pattern is selected according to the plastic point (the red points in the appeared in the figures if they reached the lower layer or no). I will attach a file name (plaxis manual) that will help you to write about how does plaxis work and in page 164 or (5-10) you will find the part of plastic points. Also, as I mentioned above the file (past thesis) will help you to write more for this part.

3- Conclusion (3pages)
Write what you conclude from the Results, analysis, and discussion section. First write 2 to 3 paragraphs and then list the points of the main concluded

4- Recommendation (1 page)
Write what do you recommend enhancing the thesis (for example: we can use shredded tires instead of crumbs…. etc.) and if you had a creative other ideas as a solution for enhancing the clayey ground in boubyan island and so on.

Compelling correspondence is essential to the achievement all things considered but since of the changing idea of the present working environments, successful correspondence turns out to be more troublesome, and because of the numerous impediments that will permit beneficiaries to acknowledge the plan of the sender It is restricted. Misguided judgments.In spite of the fact that correspondence inside the association is rarely completely open, numerous straightforward arrangements can be executed to advance the effect of these hindrances.

Concerning specific contextual analysis, two significant correspondence standards, correspondence channel determination and commotion are self-evident. This course presents the standards of correspondence, the act of general correspondence, and different speculations to all the more likely comprehend the correspondence exchanges experienced in regular daily existence. The standards and practices that you learn in this course give the premise to additionally learning and correspondence.

This question has been answered

This course starts with an outline of the correspondence cycle, the method of reasoning and hypothesis. In resulting modules of the course, we will look at explicit use of relational connections in close to home and expert life. These incorporate relational correspondence, bunch correspondence and dynamic, authoritative correspondence in the work environment or relational correspondence. Rule of Business Communication In request to make correspondence viable, it is important to follow a few rules and standards. Seven of them are fundamental and applicable, and these are clear, finished, brief, obliging, right, thought to be, concrete. These standards are frequently called 7C for business correspondence. The subtleties of these correspondence standards are examined underneath: Politeness Principle: When conveying, we should build up a cordial relationship with every individual who sends data to us.

To be inviting and polite is indistinguishable, and politeness requires an insightful and amicable activity against others. Axioms are notable that gracious “pay of graciousness is the main thing to win everything”. Correspondence staff ought to consistently remember this. The accompanying standards may assist with improving courtesy:Preliminary considering correspondence with family All glad families have the mystery of progress. This achievement originates from a strong establishment of closeness and closeness. Indeed, through private correspondence these cozy family connections become all the more intently. Correspondence is the foundation of different affiliations, building solid partners of obedient devotion, improving family way of life, and assisting with accomplishing satisfaction (Gosche, p. 1). In any case, so as to keep up an amicable relationship, a few families experienced tumultuous encounters. Correspondence in the family is an intricate and alluring marvel. Correspondence between families isn’t restricted to single messages between families or verbal correspondence.

It is a unique cycle that oversees force, closeness and limits, cohesiveness and flexibility of route frameworks, and makes pictures, topics, stories, ceremonies, rules, jobs, making implications, making a feeling of family life An intelligent cycle that makes a model. This model has passed ages. Notwithstanding the view as a family and family automatic framework, one of the greatest exploration establishments in between family correspondence centers around a family correspondence model. Family correspondence model (FCP) hypothesis clarifies why families impart in their own specific manner dependent on one another ‘s psychological direction. Early FCP research established in media research is keen on how families handle broad communications data. Family correspondence was perceived as an exceptional scholastic exploration field by the National Communications Association in 1989. Family correspondence researchers were at first impacted by family research, social brain science, and relational hypothesis, before long built up the hypothesis and began research in a family framework zeroed in on a significant job. Until 2001, the primary issue of the Family Communication Research Journal, Family Communication Magazine, was given. Family correspondence is more than the field of correspondence analysts in the family. Examination on family correspondence is normally done by individuals in brain science, humanism, and family research, to give some examples models. However, as the popular family correspondence researcher Leslie Baxter stated, it is the focal point of this intelligent semantic creation measure making the grant of family correspondence special. In the field of in-home correspondence, correspondence is normally not founded on autonomous messages from one sender to one beneficiary, yet dependent on the dynamic interdependency of data shared among families It is conceptualized. The focal point of this methodology is on the shared trait of semantic development inside family frameworks. As such, producing doesn’t happen in vacuum, however it happens in a wide scope of ages and social exchange.

Standards are rules end up being followed when performing work to agree to a given objective. Hierarchical achievement relies significantly upon compelling correspondence. So as to successfully impart, it is important to follow a few standards and rules. Coming up next are rules to guarantee powerful correspondence: clearness: lucidity of data is a significant guideline of correspondence. For beneficiaries to know the message plainly, the messages ought to be sorted out in a basic language. To guarantee that beneficiaries can without much of a stretch comprehend the importance of the message, the sender needs to impart unmistakably and unhesitatingly so the beneficiary can plainly and unquestionably comprehend the data.>

” Experimental investigation of bearing capacity of sand reinforced with rubbers (crumbs tire)”

Sample Answer

Our Services

Secure Checkout

Our Advantages